Skip to main content

Metallurgy (Extraction of Iron):

Important Ores of Iron:

 

SN

Ores

Formula

1

Haematite (Red)

Fe2O3

2

Magnetite     

Fe3O4

3

Siderite or Spathic

FeCO3

4

Iron Pyrite (fool’s Gold)

FeS2

5

Goethite

FeO(OH)

6

Limonite  

2Fe3O4.3H2O

Others Ores

7

Ilmenite  (FeO+TiO2)

FeTiO3

8

Chromite (FeO+Cr2O3)

FeCr2O4


Extraction process of iron: Iron is extracted from if oxide ores especially form the magnetite, Haematite, and Limonite ores. The extraction involves the following process.

(1) Enrichment of concentration of ores:

(A)Dressing or Benefaction of the ore: After mining, Iron ore is first broken into small pieces of 3 – 5 cm in size.

(B)Magnetic and Gravity Separation: Use due to the presence of metal carbonate

(2) Conversion of ores into oxide ores:

(A) Calcination: Heating ore in the absence of oxygen below melting point moisture and CO2 are removed.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhqj7R6K2e0EhhxO1jTnNnFquIohl4VPopGhuGQfwe_WwpN3SEeJy4OC8WBvIOr8_ksZSnj5W1uAxpz2_ldE70rS7havA8H4ae8GdzybteS63kM9Gc-WPKlK_mkhyphenhyphenIchyr5cP3X8ZIc9GM/s1600/FE1.PNG

(B) Roasting: Heating of ore in the presence of oxygen below melting point. During roasting P, S, C, As, Sb etc. are oxidized to the respective oxides and removed.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiwbljcL3sYBrWJXvOtm_FJGheSoICr8Zfa61RLyntCyKl34iow6tcIycpUl6HnhAwTomr7aCEelZ2FV0saFG47-XAG8K0zCpSLklZJznYJY1NFXkRgX8Pvw1qxh3gYOQIO0i6j-fr5uM4/s1600/FE2.PNG

(i) Fe3O4 is decomposed to ferrous oxide (FeO) and ferric oxide (Fe2O3).

(ii) Ferrous oxide reacts with silica to form ferrous silicate at high temperature.

(ii) The conversion of FeO into Fe2O3 will prevent the formation of FeSiO3 Thus

 mass of the ore becomes porous causing the increase in the effective surface area.

(3) Smelting: The calcined ore is mixed with Limestone (Flux) and Coke (a reductant) and

 smelted in Blast furnace.

Reaction in Blast furnace: A blast furnace is used for smelting to produce industrial metals, generally pig iron, but also others such as lead or copper. The blast furnace is a huge, steel stack lined with refractory brick, where iron ore, coke and limestone are dumped into the top, and pre heated air is blown into the bottom.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhuD493JwuUI18Z_mUDBgqsuAyS1mw8jLSgyKqjQu01S30LVLXPdRInnofNWH9INgT6-UV2TfKZl0ke5HqpvsYtVbQiYinQjax70qpdIjzh0I6ZJdiQVDsxtt6nYJLzF4fWJ6tiZzdU54Y/s1600/Blast+furnace.PNG

 

 (1) Zone of combustion: (900 -1500 K): This is the higher temperature range found at lower part of blast furnace

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEipFu_K37ICk7C_12brFxtMMLMnPTWrQMhf0h-azFfhSMYwEfsO3swsIiyQ4BD4FV_g49O7dGgp6I13nnJZskufaqTfLs9H7jVr5ZVbYbcgR75uJmTwMjU2U8BBcVZJjvzTmqbp7qPS9_I/s1600/FE3.PNG

(2)  Zone of reduction: (500 – 800 K): This is lower temperature range found at upper part of blast furnace.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi0OUNee2AWPtAkMPyEUx9Vfqe0s6wd9OkBu08Zwc4XTcASbgaQpDBNdrs4jvHtqOAUutqJJyMlSnb8RGyZtnAzArkekLhqUkKGwxourECUlWUEDE5XvAkX3_sw00WdSSn0M5hvKMpX07A/s1600/FE4.PNG

(3)  Zone of slag formation: (1070-1270 K): Middle part of blast furnace:

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEinSyokYiTvITubemGMCDNXfktXaY3h4I6EGGb-NC6jeWG2mPoRd13aeb2W6pdte7et7JdVELA1Qr8n-4-QpA0YkiMZAPL_ukUOpTPkMggjPS1BDcfC5CdeC5QZs4Ln1S-K0uaZdCOiuwU/s1600/FE5.PNG

Other impurities like P4O10 and SiO2 and MnO2 also reduced

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhBqrnjSMai-p479Z6xhvUGI8Zv5Zl3RUTzai8Ds7SWz_uev6JqQIy6uWi23roBC-bpG09i4f0UdOtXI_m8i2MapmNxkcaIzSYECAGGzhLkr05knV9ve7__MjvRrMLy0FLaYTsij83l2dE/s1600/FE7.PNG

(4) Zone of fusion:  (1570 – 2170 K): lower part of furnace.

Molten iron is heavier than molten slag. The two liquids are periodically tapped off and solidified into blocks called pigs. And thus Iron obtained from blast furnace is also called pig Iron.

Type of Iron:

(1) Pig Iron: Composition:

                                

SN

Impurities

%

1

Carbon (C)

3- 4.3

2

Silicon (Si)

1-2.0

3

Manganese (Mn)

0.5-2.0

4

Phosphorous (P)

0.05-2.0

5

Sulphure (S)

0.05-1.0

 

(2) White Cast Iron: When re molted pig iron is suddenly cooled, white cast iron is results. In this form of cast iron carbon is found to be combined form as cementite (Fe3C).

(3) Grey Cast Iron: However when re molted pig iron is slowly cooled, Grey cast iron is results. In this form of cast iron carbon is found to be combined form of Graphite.

(4) Wrought iron:

This is done by heating cast iron with haematite (Fe2O3) which oxidises C to CO, S to SO2, Si to SiO2, P, P4O10 and Mn to MnO . Where CO and SO2 escapes, manganese oxide (MnO) and Silica (SiO2) combine to form slag.

Similarly phosphorus pentoxide combines with haematite to form ferric phosphate slag.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEispAaX8lLyRTd2ROv91wJHyx6UPhXJ_8p7jlXizti0cy8xZagUvCrIpqyNw2vGC9WoespsWH6tNPHLWlMdF1SJ1JlssU1wAn87M63ZCctnmPJ9lGK0a36xf1xqZjrcFp450jlgT4bRQts/s1600/FE8.PNG

Manufacturing Process:

Casts iron takes in Puddling furnace and melted by hot blast of air. The chemical reactions which occur are:-

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg-6wUwptLuGetUVgY7FbyU-LArP7ntKFcwW9ll2XssngOllmlDwmtAlU7J_gf-F9KWdtM2Fz1TQIKcfs8cp_rDnPyvoW7nd4GeIujusZrmoJHavrdXsT3oG57V-uYlnftYN0LkX4jrByk/s16000/FE9.PNG

On removing impurities, the melting point rises and it becomes a semi solid mass. The metal is taken out of the furnace in the form of balls which are then beaten under hammer to separate out the slag. The product thus formed is thus called wrought iron.

Related Questions:

How does leaching of aluminium ore take place by Serpeck's process?

How does leaching of aluminium ore take place by Hall's process?

How does leaching of aluminium ore take place by Baeyer' process?

What are important ore of Iron ore ?

What is composition of Wrought Iron ?

What is composition of Grey Cast Iron ?

What is composition of White cast iron ?

What are the composition of pig iron?

 





Labels:

Comments

Post a Comment

Popular posts from this blog

MacArthur-Forrest Process:

(A) Extraction of Gold: In the Mac Arthur process, solid gold reacts with sodium cyanide to form a soluble gold complex. The impurities are filtered out of the solution and the gold is reduced back to elemental gold with a reactive metal such as zinc. (B) Extraction of Silver: Metallic Ag is dissolved from its ore in dilute NaCN solution, and the solute so obtained is treated with scrap Zn when Ag is precipitated. Air is blown into the solution oxidize Na 2 S. Leaching the metals like silver, gold with CN - is an oxidation reaction Here Zn act as reducing agent Leaching has been practiced for many years and often results in the contamination of streams and rivers with cyanide. New alternatives, using the thiosulfate ion (S 2 O 3 - ) , are being investigated to replace it. (C) Extraction of Copper: Different acid, base, and salt solutions are sometimes used to selectively separate out metal-bearing minerals. For example, sulfuric acid is used to separate the copper
Post a Comment
Read more

Cupellation-Metallurgy:

Cupellation is a refining process in metallurgy, where ores or alloyed metals  are treated under very high temperatures and have controlled operations to separate noble metals, like gold and silver, from base metals like lead, copper,  zinc, arsenic, antimony or  bismuth, present in the ore.  The process is based on the principle that precious metals do not oxidise or react chemically,   unlike the base metals; so when they are heated at high temperatures, the precious metals remain apart and the others react forming slags or other compounds. Since the Early Bronze Age, the process was used to obtain silver from smelted lead ores. By the Middle Ages and the Renaissance,   cupellation was one of the most common processes for refining precious metals . By then, fire assays were used for assaying minerals, that is, testing fresh metals such as lead and recycled metals to know their purity for jewellery and coin making. Cupellation is still in use today.
Post a Comment
Read more

Bessemerisation-Metallurgy:

The  Bessemer process  was the first inexpensive industrial process for the mass production of steel from molten pig iron before the development of the open hearth furnace. The key principle is removal of impurities from the iron by oxidation with air being blown through the molten iron. The oxidation also raises the temperature of the iron mass and keeps it molten. Related decarburizing with air processes had been used outside Europe for hundreds of years, but not on an industrial scale.One such process has existed since the 11th century in East Asia, where the scholar Shen Kuo of that era described its use in the Chinese iron and steel industry. In the 17th century, accounts by European travelers detailed its possible use by the Japanese.
Post a Comment
Read more